What to do when encountering problems using a flatbed truck?

What to do when encountering problems using a flatbed truck? Don't worry, let's take a look at the editor's introduction! A flatbed car, with a body length of about five feet and a height of over two feet, is made by assembling the frame and chassis of the car with varying numbers of flat wooden boards.

A flat car is an electric railed transportation vehicle within a factory. Also known as electric flat cars, trolley cars, and crossover cars. It has the advantages of simple structure, convenient use, easy maintenance, large bearing capacity, and less pollution. Used in machine manufacturing and metallurgical factories, as an internal coordination crane for transporting heavy objects across the workshop. The electric flat car has a low height, reinforced countertop, easy modification, and convenient maintenance. If the clutch pedal of the flatbed transport vehicle has pushed the brake on/off valve open, but it is still difficult to engage in the starting gear, it indicates that there is a malfunction in the clutch braking system. At this time, it is necessary to first check the brake air circuit, release the brake valve to the lower left side joint of the Fuller transmission, press the clutch pedal to the position where the brake valve is pushed open, and observe the air pipe joint. If the scavenging air is not smooth, it indicates that the brake switch valve is faulty and should be disassembled or replaced; If the exhaust is unobstructed, it is necessary to disassemble and inspect the clutch brake cylinder, observe whether the sealing ring of the brake cylinder is worn or leaking, and whether the piston moves freely without jamming; If there is an air leak, it needs to be replaced; O" O-ring. Check if the concave surface of the piston brake arc is severely worn. If the wear is severe, replace the brake cylinder piston. If you find it difficult to shift gears during normal operation of a flatbed transport vehicle, you should first check if it is a malfunction of the remote control shift lever system. If the shift lever system is adjusted improperly or the connection head leaks, it can cause faults that increase shift resistance and make it difficult to shift. Especially when it is difficult to shift in certain gears, the support adjustment screw of the shift lever arm on the gearbox can be adjusted to ensure that the control lever system is in a suitable position.

The above is the relevant content about flatbed trucks, welcome everyone to supplement!